Keeping your compressed air system running smoothly. We are your ONE STOP supplier for your compressed air system, including Air Compressor Sales & Service, Compressed Air Parts, and complete turnkey installations.
Phone:
1-888-826-7247

Blog

Debunking 3 Myths Surrounding Air Compression

June 17, 2020

Debunking 3 Myths Surrounding Air Compression

Compressed air has become an indispensable source of power in today’s automation and industrial assembly, making air compressor service in Toronto of utmost importance, too. Without this energy source, modern industry will grind to a halt. However, there are still plenty of myths that surround the use of air compressors that are mostly founded on misunderstandings about what this equipment can do. Here are a few of them debunked for you to be aware of so that your air compressor doesn’t end up malfunctioning, causing you to seek air compressor service in Toronto.

 

#1: Boosted oil carryover results from variable speed drives

It is not true that oil carryover is increased in variable speed drives because it is primarily caused by two things - heat and low pressure. They have no direct connection with variable speed drives. In fact, operating at lower rates most likely doesn’t cause any adverse effects on oil carryover. The reduced airflow will also lower the separator speed, making the whole system work more efficiently.

 

#2: Air compressor fluids are all the same

All synthetic fluids share one common thing - hydrocarbon base stock. However, that’s where their similarities end as they are made of different formulations that significantly vary in terms of impact on the compressor’s performance. This is why each air compressor service in Toronto always checks on the kind of fluid or lubricant used by the system to make sure that it is the right one for the equipment to work optimally.

 

#3: System-wide pressure increases productivity

Contrary to the common belief that a maximum centralized level of pressure raises productivity, this can actually cause severe complications. The truth is that pressure requirements are handled better at the localized level in large-scale production runs. More importantly, compressed air works best only if pressure levels are suited to certain applications, and that can be either be reduced or increased depending on the requirements. Overdoing or underdoing it will cause complications.